Wacker Neuson Telehandler TH412

5-78 BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm
5 Operation
Working with the pallet forks Picking up a load
1. Check whether the permissible load-carrying capacity
of the machine and pallet forks is appropriate for the
weight of the load.
2. Adjust the fork spacing and lock the forks.
3. Approach the material in a straight line.
4. Set the pallet forks to the required height in a
horizontal position.
5. Travel forward until the load touches the fork frame.
6. Slightly raise and tilt back the pallet forks.
7. Set the load to transport height.
1
2
3
4
5
7
6
Fig. 101