Operation 5
BA TH412 * 06/2017 * 4512_5-11_Arbeitsbetrieb_en.fm
5-79
Transporting a load
1. Transport the load as close a possible to the ground.
- Adjust a transport height that allows moving the
pallet forks across uneven ground without touching
it.
- Adjust the height during transportation if necessary.
2. During machine travel up or down a slope the load
must always be on the uphill side.
- Secure the load with ratchet straps if necessary.
3. If necessary, transport large, bulky loads in reverse to
ensure sufficient visibility.
To Next Page
Loading...
