5-92
BA TH412 * 06/2017 * 4512_5-13_2_Opt_Hydr_en.fm
5 Operation
Rear hydraulic connection
Operating the rear hydraulic connection with a
control lever
The rear hydraulic connections can be operated with the
control lever 6 for the auxiliary hydraulics.
With this type of connection the hydraulic connections on
the loader unit and at the rear of the machine are
operated at the same time.
► Before coupling/uncoupling, release the pressure in
the hydraulic circuit as described in section
Coupling/
uncoupling hydraulic connections from the mast on
page 5-52.
To Next Page
Loading...
