Wacker Neuson Telehandler TH412 User Manual

Maintenance 7
BA TH412 * 06/2017 * 4512_7-13_Elektrik_en.fm 7-59
Before jump-starting, check whether the battery of the
machine is still functional.
1. Set all control levers and switches to the zero position.
2. Turn the starting key to position I.
➥ The indicator lights must illuminate.
3. The indicator lights do not illuminate.
- Malfunctioning battery.
➥ Do not start the machine in this case.
➥ Install a functional battery.
Preparations
1. Set all control levers and switches to the zero position.
2. Turn the starting key to position 0.
➥ The electrical system is de-energized.
3. Drive the vehicle giving a jump start (charged battery)
up to the machine (battery to be charged) so that the
batteries can be connected by means of the battery
jumper cables, but without the vehicles touching.
4. Set all control levers and switches to the zero position
on the machine giving a jump start.

Wacker Neuson Telehandler TH412 Specifications

General

Brand	Wacker Neuson
Model	Telehandler TH412
Category	Compact Loader
Language	English