3
Lifting and Transporting
Lifting the
Machine
This machine is heavy enough to cause injury if proper lifting techniques are not
used. Observe the following guidelines when lifting the vibroplate.
Do not attempt to lift the machine unassisted. Grasp machine by lifting handles
(a). Use appropriate lifting equipment such as slings, chains hooks, ramps or
jacks.
Make sure lifting equipment is attached securely and has enough weight-
bearing capacity to lift or hold the machine safely.
Remain aware of the location of other people nearby when lifting the machine.
wpm_gr013777
Transporting
the Machine
Observe the following guidelines when transporting the vibroplate to and from the
job site.
Drain the fuel tank before transporting the machine.
Ensure that the machine is securely strapped down in the transport vehicle to
prevent it from sliding or tipping.
Tie-down points:
Do not refuel the machine in or on the transport vehicle. Move the machine to its
operating location and then fill the fuel tank.
VP1030A/AW Lifting and Transporting
To Next Page
Loading...
