Wacker Neuson VP1030A-CE - Maintenance; Maintaining the Emission Control System; Periodic Maintenance Schedule

wpm_tx004452gb.fm
23
5 Maintenance
5.1 Maintaining the Emission Control System
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishments or individual; however,
warranty repairs must be performed by a dealer service center authorized by
WACKER NEUSON. The use of service parts that are not equivalent in
performance and durability by authorized parts may impair the effectiveness of the
emission control system and may have a bearing on the outcome of a warranty.
5.2 Periodic Maintenance Schedule
Engine Maintenance
The chart below lists basic engine maintenance. Refer to the engine
manufacturer’s Operation manual additional information.
Daily
before
starting
After
first
20 hr
or
1mo.
Every
50 hr
or 3
mo.
Every
100 hr
or 6
mo.
Every
300 hr
or 1 yr.
Check the fuel level.

Check the engine oil level.

Inspect the fuel lines

Inspect the air filter. Replace as
needed

Clean the air cleaner element

Change the engine oil


Clean the engine cooling fins

Clean the sediment cup or fuel
filter.

Check and clean the spark plug.

Check and adjust the valve
clearance.

VP1030A/AW Maintenance