Pan/Zoom
to zoom out or towards the bottom to zoom in.
If you pick up your pen to hover, zooming stops. As long as you continue to hover and hold the
button, you can still zoom when you touch the pen tip to the surface again.
If you want to pan again after zooming, release the button and press it again.
Notes
If the application does not support Pan/Zoom, the following happens instead:
Pressing the button while hovering activates a Ctrl + Right-Click.
Pressing the button while touching the surface activates a mouse wheel scroll.
When you select Pan/Zoom to assign it to a button, the Zoom Speed window appears. Move the slider
to your preferred zooming speed.
Changing the pen button mode does not affect this setting.
Precision
Mode
Toggles between normal precision and a precision that you choose, from Fine to Ultra Fine.
In the Precision Mode window that appears, move the slider to set the precision that you toggle into.
For example, if you assign Precision Mode to a pen button, when you press the pen button, you switch to
working in the precision that you selected from the slider. When you press the pen button again, you
switch back to working in the normal precision.
Pressure
Hold
Locks the pressure at the current level until you release the component.
For example, if you assign this setting to a pen button, you can paint with pressure sensitivity enabled in your
application until you reach the brush size you like. Then, press and hold the pen button to lock in that brush size
as long as you are pressing and holding the button.
Right Click Performs a right mouse button click.
Scroll Scrolls when you use the Touch Ring.
Scroll
Down
Scrolls your active application down.
Scroll Up Scrolls your active application up.
Settings
Displays the current settings of your customizable components, including ExpressKeys™, the Touch Ring, pen,
and touch.
Click on any item that displays to open Wacom Tablet Properties so you can adjust setting assignments, if
desired.
Show
Desktop
Minimizes all open windows so you can view your desktop.
Skip
Assign this setting to the Touch Ring center button so you can skip one of the settings that you assigned to the
Touch Ring.
Switch
Application
Toggles between the applications that you have open.
Tablet PC
Settings
Displays the Tablet PC Settings menu.
To Next Page
Loading...
