3
contents
PS 3.25
1 SAFETY REGULATIONS FOR AIRLESS
SPRAYING ______________________________ 4
1.1 Explanation of symbols used _____________________4
1.2 Electric safety _________________________________8
1.3 Electrostatic charging
(formation of sparks or ames) ___________________8
2 GENERAL VIEW OF APPLICATION __________ 9
2.1 Application ___________________________________ 9
2.2 Coating materials ______________________________ 9
3 DESCRIPTION OF UNIT __________________ 10
3.1 Airless process _______________________________10
3.2 Functioning of the unit ________________________10
3.3 Technical data _______________________________12
3.4 Legend for explanatory diagram PS 3.25 __________11
3.5 Explanatory diagram PS 3.25 ____________________ 11
3.6 Transportation _______________________________12
3.7 Transportation in vehicle _______________________12
4 STARTING OPERATION __________________ 12
4.1 High-pressure hose, spray gun and separating oil ___ 12
4.2 Control panel indicators _______________________13
4.3 Pressure control knob settings __________________13
4.4 Connection to the mains network _______________14
4.5 Cleaning preserving agent when
starting-up of operation initially _________________14
4.6 Taking the unit into operation with coating material 14
4.7 Digital Electronic Spray Control (DESC) ___________15
5 SPRAYING TECHNIQUE __________________ 17
6 HANDLING THE HIGHPRESSURE HOSE ____ 18
7 INTERRUPTION OF WORK ________________ 18
8 CLEANING THE UNIT SHUTTING DOWN __ 19
8.1 Cleaning unit from outside _____________________19
8.2 Suction lter _________________________________19
8.3 Cleaning the high-pressure lter ________________20
8.4 Cleaning Airless spray gun _____________________20
9 REMEDY IN CASE OF FAULTS _____________ 21
10 SERVICING _____________________________ 22
10.1 General servicing _____________________________22
10.2 High-pressure hose ___________________________22
11 REPAIRS AT THE UNIT ___________________ 22
11.1 Relief valve __________________________________22
11.2 Inlet and outlet valve __________________________23
11.3 Packings ____________________________________24
11.4 PS 3.25 connection diagram ____________________25
11.5 Digital Electronic Spray Control (DESC)
Error Messages _______________________________25
12 APPENDIX _____________________________ 26
12.1 Selection of tip _______________________________26
12.2 Servicing and cleaning of Airless hard-metal tips ___26
12.3 Spray gun accessories _________________________27
12.4 Airless tip table ____________________________ 28/29
12.5 TempSpray __________________________________30
12.6 Pump-Runner ________________________________ 31
ACCESSORIES FOR PROSPRAY 3.25 _________ 32/33
Spare parts list for main assembly __________________ 34/35
Spare parts list for the uid section ____________________36
Spare parts list for drive assembly ____________________37
Spare parts list of stand _____________________________38
Spare parts list for suction system of stand ______________39
Spare parts list of upright cart assembly ________________40
IMPORTANT NOTES ON PRODUCT LIABILITY ___ 41
3+2 YEARS GUARANTEE FOR PROFESSIONAL
FINISHING __________________________________ 41
SALES AND SERVICE COMPANIES __________ 43/44