WAGNER 0558021 User Manual

9
general view of application
PS 3.25
2 GENERAL VIEW OF APPLICATION
2.1
APPLICATION
2.2 COATING MATERIALS
PROCESSIBLE COATING MATERIALS
i
Pay attention to the Airless quality of the coating
materials to be processed.
Dilutable lacquers and paints or those containing solvents, two-
component coating materials, dispersions, latex paints, release
agents, oils, undercoats, primers, and llers.
No other materials should be used for spraying without
Wagner’s approval.
FILTERING
Despite suction lter and insertion lter in the spray gun,
ltering of the coating material is generally advisable.
Stir coating material before commencement of work.
i
Attention: Make sure, when stirring up with
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
VISCOSITY
With this unit it is possible to process highly viscous coating
materials of up to around 25.000 MPa·s.
If highly viscous coating materials cannot be taken in by suction,
they must be diluted in accordance with the manufacturer’s
instructions.
TWOCOMPONENT COATING MATERIAL
The appropriate processing time must be adhered to exactly.
Within this time rinse through and clean the unit meticulously
with the appropriate cleaning materials.
COATING MATERIALS WITH SHARPEDGED ADDITIONAL
MATERIALS
These have a strong wear and tear eect on valves, high-
pressure hose, spray gun and tip. The durability of these parts
cane be reduced appreciably through this.
Materials Object Size
Model
PS 3.21 PS 3.23 PS 3.25 PS 3.29 PS 3.31 PS 3.34 PS 3.39
Release agents, oils, undercoats, primers, llers,
synthetic resin-based paints, acrylic paints
recommended nozzle size: FineFinish 0.008“ - 0.014“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Emulsion paints, latex paints
recommended nozzle size: 0.017“ - 0.027“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Anti-corrosive agents, ame retardants, fabric
adhesive
recommended nozzle size: 0.021“ - 0.031“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
Airless-scrapers
recommended nozzle size: 0.027“ - 0.039“
up to 200 m
2
200 m
2
- 800 m
2
more than 800 m
2
= Recommended = Not-recommended

WAGNER 0558021 Specifications

General

Brand	WAGNER
Model	0558021
Category	Paint Sprayer
Language	English