30
appendix
PS 3.25
12.5 TEMPSPRAY
The paint material is heated to the required temperature uniformly by an electric heating element, which is located inside the hose
(regulated from 20°C to 60°C).
Advantages:
• Constant paint temperature even at low outside temperatures
• Considerably better working of high viscosity coating materials
• Increased application eciency
• Savings in solvents due to reduction in viscosity
• Adaptable to all airless units
Order No. Description
2311659
2311852
TempSpray H 126 (ideal for lacquer jobs)
Basic unit 1/4“ incl. stainless steel hose, DN6, 1/4“, 10m
Spraypack consisting of: basic unit (2311659), Airless gun AG 14 NPS 1/4“, incl. Trade Tip 2 nozzler holder
(F-thread) and Trade Tip 2 Fine Finish 410
2311660
2311853
TempSpray H 226 (ideal for dispersions/materials with high viscosity)
Basic unit 1/4“ incl. Hose reel, heated hose DN10, 15m, hose 1/4“ DN4, 1m
Spraypack consisting of: Basic unit (2311660), Airless gun AG 14 NPS 1/4“, incl. Trade Tip 2 nozzler holder
(F-thread) and Trade Tip 2 nozzle 419
2311661
2311854
TempSpray H 326 (ideal for dispersions/materials with high viscosity)
Basic unit 1/4“ incl. Hose reel, heated hose DN10, 30m, hose 1/4“ DN4, 1m
Spraypack consisting of: Basic unit (2311661), Airless gun AG 14 NPS 1/4“, incl. Trade Tip 2 nozzler holder
(F-thread) and Trade Tip 2 nozzle 421
TempSpray H 126
TempSpray H 226
TempSpray H 326
To Next Page
Loading...
Need help?
General
