WAGNER FC3500 - Page 19

124
FinishControl 3500
J. Wagner GmbH Otto Lilienthal-Str.18 D-88677 Markdorf
D
GB
F
I
Konformitätserklärung Declaration of conformity Déclaration de conformité Dichiarazione di conformitá
Hiermit erklären wir, daß die Bauart vom
Airless Hochdruck-Spritzgerät,
benzinbetrieben
Herewith we declare that the supplied
version of
Airless high-pressure spraying unit, gas
powered
Par la présente, nous déclarons, que le
type de Groupe de projection à haute pression, à
essence
Si dichiara che il modello
Impianto per la verniciatura a spruzzo ad
alta pressione Airless, azionato a benzina
WAGNER FinishControl 3500
folgenden einschlägigen Bestimmungen
entspricht:
complies with the following provisons
applying to it:
correspond aux dispositions pertinentes
suivantes:
é conforme alle segenti disposizioni
pertinenti:
2006/42/EG, 2004/108/EG, 2011/65/EG,
2002/96/EG
2006/42/EC, 2004/108/EC, 2011/65/EC,
2002/96/EC
2006/42/CE, 2004/108/CE, 2011/65/CE,
2002/96/CE
2006/42/CE, 2004/108/CE, 2011/65/CE,
2002/96/CE
Angewendete harmonisierte Normen,
insbesondere:
Applied harmonized standards, in
particular:
Normes harmonisée utilisées,
notamment:
Norme armonizzate applicate,
in particolare:
EN 60745-1:2009 + A11:2010, EN 50580:2012, EN 62233:2008, EN 55014-1:2006 +A1:2009 +A2:2011,
EN 55014-2:1997 +Corrigendum 1997 +A1:2001 +A2:2008, EN 61000-3-2:2006 +A1:2009 +A2:2009,
EN 61000-3-3:2008
Markdorf, 11.12.2013 ________________ ____________________
Location, Date Signature
i.V. Hr. T. Jeltsch (Mr.) i.V. Hr. J. Ulbrich (Mr.)
Senior Vice President Vice President Engineering
Global Product Strategy & Planning
Dokumentationsverantwortlicher
Responsible person for documents
Responsable de la documentation
Responsabile della documentazione