To Next PageTo Next PageWhy does the spray jet pulsate on my WAGNER FLEXIO 2500?
If the spray jet on your WAGNER Paint Sprayer pulsates, it could be because the material in the container is running out, so refill it. Another possible cause is a clogged air filter, which would need to be changed.
What to do if the spray jet pulsates on my WAGNER Paint Sprayer?
If the spray jet on your WAGNER Paint Sprayer is pulsating, it could be due to the material in the container running out; refill it. Another cause might be a clogged air filter, which you should change. Also, check the vent hole on the suction tube for clogs and clean it if necessary.
General| Power Source | Corded Electric |
|---|---|
| Type | Airless paint sprayer |
| Flow Rate | 1.2 l/min |
| Material Compatibility | Stains, Varnishes |
| Container Capacity | 1.5 qt |
| Max. flow rate | 1.2 l/min |
| Spray Technology | High Volume Low Pressure (HVLP) |
| Spray tip | iSpray Nozzle |
Explains the importance of grounding electrical equipment for safety.
Provides guidelines for using extension cords and electrical connections safely.
Warns about flammable vapors and ignition sources in the work area.
Details the risks of electric shock and necessary precautions.
Covers general safety precautions for operating the equipment.
Identifies the X-Boost™ Turbine and its main controls.
Identifies the iSpray® Nozzle and its function.
Identifies the Detail Finish Nozzle and its application.
Explains how the X-Boost™ power dial/switch adjusts air power.
Provides essential techniques for achieving a good spray finish.
Addresses problems with little/no flow, thick/running patterns, and light/splotchy finishes.
