WAGNER ProSpray 3.25 - Troubleshooting Faults and Solutions

ProSpray 3.25 21
GB
Appendix
12.5 TempSpray
The paint material is heated to the required temperature uniformly by an electric heating element, which is located inside the hose
(regulatedfrom20°Cto60°C).
Advantages:
 • Constantpainttemperatureevenatlowoutsidetemperatures
 • Considerablybetterworkingofhighviscositycoatingmaterials
 • Increasedapplicationefciency
 • Savingsinsolventsduetoreductioninviscosity
 • Adaptabletoallairlessunits
Order No. Description
2311659
2311852
TempSpray H 126 (ideal for lacquer jobs)
Basicunit1/4“incl.stainlesssteelhose,DN6,1/4“,10m
Spraypackconsistingof:basicunit(2311659),AirlessgunAG14NPS1/4“,incl.TradeTip2nozzlerholder
(F-thread) and Trade Tip 2 Fine Finish 410
2311660
2311853
TempSpray H 226 (ideal for dispersions/materials with high viscosity)
Basicunit1/4“incl.Hosereel,heatedhoseDN10,15m,hose1/4“DN4,1m
Spraypackconsistingof:Basicunit(2311660),AirlessgunAG14NPS1/4“,incl.TradeTip2nozzlerholder
(F-thread)andTradeTip2nozzle419
2311661
2311854
TempSpray H 326 (ideal for dispersions/materials with high viscosity)
Basicunit1/4“incl.Hosereel,heatedhoseDN10,30m,hose1/4“DN4,1m
Spraypackconsistingof:Basicunit(2311661),AirlessgunAG14NPS1/4“,incl.TradeTip2nozzlerholder
(F-thread)andTradeTip2nozzle421
TempSpray H 126
TempSpray H 226
TempSpray H 326
Uncontrolled Copy