WAGNER Super Finish 33 Pro - Default Chapter; Table of Contents

39
Super Finish 33 PRO
GB
CONTENTS
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 40
1.1 Flash point _________________________________ 40
1.2 Explosion protection _________________________ 40
1.3 Danger of explosion and re from sources of
ignition during spraying work _________________ 40
1.4 Danger of injury from the spray jet _____________ 40
1.5 Secure spray gun against unintended operation __ 40
1.6 Recoil of spray gun __________________________ 40
1.7 Breathing equipment as protection against
solvent vapors ______________________________ 40
1.8 Prevention of occupational illnesses ____________ 40
1.9 Max. operating pressure ______________________ 41
1.10 High-pressure hose _________________________ 41
1.11 Electrostatic charging
(formation of sparks or ames) ________________ 41
1.12 Use of units on building sites and workshops _____ 41
1.13 Ventilation when spraying in rooms ____________ 41
1.14 Suction installations _________________________ 41
1.15 Earthing of the object ________________________ 41
1.16 Cleaning the unit with solvents ________________ 41
1.17 Cleaning the unit ___________________________ 41
1.18 Work or repairs at the electrical equipment ______ 41
1.19 Work at electrical components _________________ 42
1.20 Setup on an uneven surface ___________________ 42
2 GENERAL VIEW OF APPLICATION ____________ 42
2.1 Application ________________________________ 42
2.2 Coating material ____________________________ 42
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 42
2.2.2
Two-component coating material ______________ 42
2.2.3 Filtering ___________________________________ 43
3. DESCRIPTION OF UNIT _____________________ 43
3.1 Airless process ______________________________ 43
3.2 Functioning of the unit _______________________ 43
3.3 Explanatory diagram _________________________ 44
3.4 Transportation ______________________________ 44
3.5 Tool box __________________________________ 45
3.6 Technical data ______________________________ 45
4 STARTUP _________________________________ 46
4.1 Unit with suction system _____________________ 46
4.2 unit with upper hopper ______________________ 46
4.3 High pressure hose and spray gun ______________ 46
4.4 Connection to the mains network ______________ 46
4.5 Cleaning preserving agent when starting-up of
operation initially ___________________________ 47
4.6 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 47
4.7 Taking the unit into operation with
coating material ____________________________ 47
5 SPRAYING TECHNOLOGY ___________________ 48
6 HANDLING THE HIGHPRESSURE HOSE _______ 48
7 INTERRUPTION OF WORK ___________________ 48
8 CLEANING THE UNIT _______________________ 49
8.1 Cleaning the unit from the outside _____________ 50
8.2 Suction lter _______________________________ 50
8.3 High-pressure lter __________________________ 50
8.4 Cleaning the Airless spray gun _________________ 51
9 SERVICING ________________________________ 51
9.1 General servicing ___________________________ 51
9.2 High-pressure hose __________________________ 51
10 REPAIRS AT THE UNIT ______________________ 52
10.1 Inlet valve Pusher ___________________________ 52
10.2 Inlet valve _________________________________ 52
10.3 Outlet valve ________________________________ 53
10.4 Pressure control valve ________________________ 53
10.5 Replacing the power cable ___________________ 54
10.6 Typical wear parts ___________________________ 54
10.7 Connection diagram _________________________ 55
10.8 Remedy in case of faults ______________________ 56
11 SPARE PARTS AND ACCESSORIES ____________ 58
11.1 Super Finish 33 Pro accessories ________________ 58
11.2 Spare parts list Super Finish 33 Pro _____________ 66
11.3 Spare parts list high-pressure lter _____________ 68
11.4 Spare parts List Trolley _______________________ 68
11.5 Spare parts list suction system ________________ 69
11.6 Spare parts list hopper 5 litres _________________ 70
11.7 Spare parts list hopper 20 litres ________________ 70
Testing of the unit ________________________________ 71
Important information on product liability_____________ 71
Note on disposal
__________________________________ 71
Guarantee declaration _____________________________ 71
CE - declaration___________________________________ 72
European service network _________________________ 144