Walker B18 User Manual

Specications
4
MODEL B18
TRANSMISSION (continued)
Neutral
Transmission Release by Manual Dump Valve
Final Drive
Transaxle Direct to Drive Wheel
Transmission Fluid
Factory Service
20W-50 Multi-Viscosity Motor Oil (Minimum SL Grade Oil)
Transmission Oil Capacity fl oz (L) 79 (2.3)
Transmission Cooling
Cooling Fan Mounted on Drive Pulley
Oil Filter Hydro-Gear
®
P/N 52114 (Walker P/N 2026-6)
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)
0-8 (0-13) Infinitely Variable
0-5 (0-8) Infinitely Variable
BLADE DRIVE
PTO Shaft
Sliding Spline Shaft with Two High-Speed U-Joints
Blade Drive Clutch and Brake Manual Belt Tightener Clutch and Band Brake
[Stops Blades within Five (5) Seconds of Disengagement]
TIRE SIZE
Deck Caster
8 x 3.00-4 (Pneumatic 4-Ply)
Drive 18 x 8.50-10 (Pneumatic 4-Ply, Low-Profile)
18 x 7.00-8 (Pneumatic 4-Ply, Optional)
Tailwheel 11 x 4.00-5 (Pneumatic)
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel
20 (137)
Drive
15 (103)
Tailwheel 20 (137)
MOWER DECK
Recommended Cut Width
48" Mulch Deck (DM48-2) 48 in. (122 cm)
Cutting Height 1 to 4 in. (2.5 to 10 cm)
Deck Suspension Independent Torsion-Flex Frame with Caster Wheels and
Counterweight Springs

Walker B18 Specifications

General

Brand	Walker
Model	B18
Category	Lawn Mower
Language	English