Walker B23 User Manual

B23 Safety Instructions
13
MAINTENANCE
1. To prevent accidental starting of the engine
when servicing or adjusting the machine,
remove the key from the ignition switch and
disconnect the spark plug wires.
2. To reduce re hazards, keep the engine free
of grass, leaves, excessive grease, and dirt.
3. Keep all nuts, bolts, and screws tight to ensure
the machine is in a safe, working condition.
Check the blade mounting nuts frequently,
mak ing sure they are tight.
4. Perform only maintenance instructions
described in this manual. Unauthorized
maintenance operations or machine modica-
tions may result in unsafe operating condi-
tions.
5. If the engine must be running to perform a
main tenance adjustment, keep hands, feet,
and clothing away from moving parts. Do not
wear jewelry or loose clothing.
6. Always use the proper engine service man-
ual when working on the engine. Unauthor-
ized maintenance operations or modications
to the engine may result in unsafe operating
conditions.
7. Altering the equipment or engine in any man-
ner which adversely a󰀨ects its operation,
perfor mance, durability, or use will VOID the
warranty and may cause hazardous condi-
tions.
8. Never attempt to disconnect any safety devic-
es or defeat the purpose of these safety de-
vices.
9. Do not change the engine governor settings or
overspeed the engine. The governor has
been factory-set for maximum-safe engine
operating speed.
10. Use genuine factory replacement parts.
Sub stitute parts may result in product malfunc-
tion and possible injury to the operator and/or
others.
11. Use care when charging the battery or
per forming maintenance on the battery and
electrical system:
a. Make sure the battery charger is un-
plugged before connecting or disconnect-
ing cables to the battery.
b. Charge the battery in a well-ventilated
space, so gases produced while charging
can dissipate.
c. Keep sparks, ames, and smoking materi-
als away from the battery at all times. To
avoid sparks, use care when removing
bat tery cables from posts.
d. Disconnect both battery cables before
unplugging any wiring connectors or mak-
ing repairs on the electrical system.
IMPORTANT: Keep all applicable manuals
immediately accessible to anyone who may
operate or service this machine.

Walker B23 Specifications

General

Brand	Walker
Model	B23
Category	Lawn Mower
Language	English