B23 Assembly Instructions
27
Tilt-Up
Latch
Tilt-Up
Hook
Tilt-Up Hook and
Latch Connected
Tilt Bar
Deck Lock
Lever
Deck Secured in TILT-UP Position
CAUTION
Do not operate machine with deck tilt-up
pivot joint unlocked.
DANGER
Do not operate the mower with deck in tilt-
up position. Do not move the tractor with
the deck in the tilt-up position.
F CHECK MOWER BLADE CONDITION,
SHARPNESS, AND SECURITY OF MOUNT-
ING
The blade mounting nuts on gear-driven decks
should be torqued to 60 lb·ft (81 N·m), and the
blade mounting bolts on belt-driven decks
torqued to 70 lb·ft (95 N·m). If blade sharpen-
ing is required, refer to Sharpen Mower Blades
on page 56.
F PERFORM ANY ADDITIONAL NECESSARY
MAINTENANCE PROCEDURES
Refer to the chart listing all the maintenance
tasks and recommended intervals at the
beginning of the Maintenance Instructions on
page 41.
To Next Page
Loading...
Need help?
General
