Walker H37i - Page 31

Assembly Instructions
27
Tilt Bar
TiltUp Hook and
Latch Connected
TiltUp
Hook
TiltUp
Latch
Hitch Pin
Deck Secured in TILT-UP Position
CHECK MOWER BLADE CONDITION,
SHARPNESS, AND SECURITY OF MOUNT
ING
The blade mounting nuts on geardriven decks
should be torqued to 60 lb·ft (81 N·m), and the
blade mounting bolts on beltdriven decks torqued to
70 lb
·ft (95 N·m). If blade sharpening is required,
refer to CHECKING/SERVICING for Sharpen Mow-
er Blades in Maintenance Instructions.
PERFORM ANY ADDITIONAL PROCEDURES
called for in the MAINTENANCE SCHEDULE
CHART in Maintenance Instructions.