Walker Mowers - Blade Drive; Tire Size; Tire Pressure; Dimensions

Specications
4
MODEL MBS29
TRANSMISSION (continued)
Transmission Fluid
Factory Service 20W-50 Multi-Viscosity Motor Oil (Minimum SL Grade Oil)
Transmission Oil Capacity qt (L) 2.4 (2.3)
Transmission Cooling Cooling Fan Mounted on Drive Pulley
Oil Filter Hydro-Gear
®
P/N 52114 (Walker P/N 2026-6)
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)
0-10 (0-16) Innitely Variable
0-5 (0-8) Innitely Variable
BLADE DRIVE
PTO Shaft Sliding Spline Shaft with Two (2) High-Speed U-Joints
Blade Spindle Each Blade (3) Mounts Directly on Belt Driven Spindles
Blade Drive Clutch and Brake Manual Belt Tightener Clutch and Band Brake
[Stops Blades within Five (5) Seconds of Disengagement]
TIRE SIZE
Deck Caster Wheel 13 x 5.00-6 Pneumatic (4-Ply)
Drive 22 x 10.50-12 (4-Ply Low-Prole)
Rear 13 x 5.00-6 (4-Ply)
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel 20 (137)
Drive 15 (103)
Rear 20 (137)
DIMENSIONS (Tractor and Mower)
Length in. (cm) 100-1/4 (255)
Tractor Only 68-1/2 (174)
Wheel Base (Tractor) 42-5/8 (109)
With DRD52 105-1/2 (267)
With DSD60 107 (272)
Tractor w/Tilted Deck 83-1/2 (212)
Width in. (cm)
With DRD52 54-1/4 (138)
With DSD60 (Deector Up) 62 (158)
Tread Width 36-1/2 (93)
Height in. (cm) 47-1/2 (121)
Standard Tractor 46-3/4 (119)