Walker R21 User Manual

Foreword
Thank you. . .for purchasing a Walker mower. Every effort has been made to provide you with
the most reliable mower on the market, and we are sure you will be among our many satised
customers. If for any reason this product does not perform to your expectations, please contact
your local dealer. Every customer is important to us. Your satisfaction is our goal.
Please. . .read this manual thoroughly! This manual is to be used in conjunction with the engine
manufacturer’s manual for the specic engine on the mower model you have purchased. Be-
fore you operate your new mower, please read this entire manual. Some of the information is
crucial for proper operation and maintenance of this mower - it will help protect your investment
and ensure that the mower performs to your satisfaction. Some of the information is important
to your safety, and must be read and understood to help prevent possible injury to the opera-
tor or others. If anything in this manual is confusing or hard to understand, please contact your
local authorized dealer or call our service department, at (970) 221-5614, for clarication before
operating or servicing this mower.
This manual covers Model R with the Kohler KT620 (21 HP) Gasoline Engine.
All shields and guards must be in place for the proper and safe operation of this machine.
Where they are shown removed in this manual, it is for illustration purposes only. Do not oper-
ate this machine unless all shields and guards are in place.
Specications given are based on the latest information available at the time this manual was
produced for a tractor with standard equipment. Optional equipment is available and may affect
the standard specications listed.
Walker Mfg. Co. is continually striving to improve the design and performance of its products.
We reserve the right to make changes in specications and design without thereby incurring any
obligation relative to previously manufactured products.
Sincerely,
WALKER MANUFACTURING COMPANY
Bob Walker, President

Walker R21 Specifications

General

Drive System	Hydrostatic
Cutting Height	1.5 - 4.5 inches
Engine	Kohler CH740
Engine Type	Air-cooled
Cutting Width	52 inch
Wheel Size	20 inches (rear)