T27i Assembly Instructions
29
Tilt-Up
Hook
Tilt-Up
Latch
Deck Lock
Lever
Tilt-Up Handle
Tilt-Up Hook and
Latch Connected
Deck Secured in TILT-UP Position
CAUTION
Do not operate machine with deck tilt-up
pivot joint unlocked.
DANGER
Do not operate the mower with deck in tilt-
up position. Do not move the tractor with
the deck in the tilt-up position.
F CHECK MOWER BLADE CONDITION,
SHARPNESS, AND SECURITY OF MOUNT-
ING
The blade mounting nuts on gear-driven decks
should be torqued to 60 lb
·ft (81 N·m), and
the blade mounting bolts on belt-driven decks
torqued to 70 lb·ft (95 N·m). If blade sharpen-
ing is required, refer to Sharpen Mower Blades
on page 73.
F PERFORM ANY ADDITIONAL PROCEDURES
called for in the Maintenance Schedule Chart
on page 55.
To Next Page
Loading...
