COMMANDER - installation guide en 16
STARTUP
Once the DRILL & MOUNT process is completed your Wallbox Commander is ready to operate. But first let’s take a moment to read and review
some useful information before starting to use your Wallbox Commander:
Do not use your Wallbox Commander for purposes not described in the Product description chapter
Do not open in any case the Wallbox Commander front cover while the power supply is on.
Special preventions must be taken for medical or implantable electronics. Please contact the device manufacturer to understand the eects
that charging may have on such electronics.
REVIEW & CONFIRM ALL THE STEPS TAKEN
At this point you can now turn on the power supply and start your Wallbox experience
To Next Page
Loading...
