1. Introduction
EN - V2.0 4
What is the biggest problem when installing many chargers?
• Available power is limited (upgrade of installation is very expensive).
How do we solve the problem?
• Most eicient distribution of the available power – without extra cost / additional device.
Which factors did we take into account?
• A car stays longer than it charges – Wallbox will use that available power.
• Each installation has their own characteristics – Wallbox allows a most flexible installation.
• The installation is often not connected to the Internet – Wallbox does not require
Internet-connection.
• When connecting many devices, easy troubleshooting is key – Wallbox gives full visibility
over the status.
Re-assignation of unused power, example:
• A car uses actually less than it has assigned from power sharing.
• A car is full and will not charge anymore.
Eiciency
INSTALLATION GUIDE
To Next Page
Loading...
