Need help?Do you have a question about the Wallbox Copper and is the answer not in the manual?
General| Rated Power | Up to 22 kW |
|---|---|
| Charging Standard | Type 2 |
| Input Voltage | 400 V AC (3-phase) |
| Connectivity | Wi-Fi, Ethernet, Bluetooth |
| Enclosure Rating | IP54 |
| Current | 32 A |
| Cable Length | 5 m |
| Compatibility | All electric vehicles with Type 2 connector |
| Smart Features | Scheduled Charging |
Explains how to position Terminating (T) and Non-Terminating (NT) chargers in the system.
Details CAN-H/-L cabling requirements, cable type, and maximum length for charger communication.
Explains specific CAN cabling procedures for Commander and Pulsar chargers using external terminals.
Explains how to set Master and Slave roles using the rotary switch for power sharing.
Details required parameters like Number of Chargers and Max Current per Phase for the Master.
Describes how to interpret charger status indicators and app displays in Power Sharing.
Addresses red LEDs, blinking green LEDs, erratic behavior, and resistor value issues.
To Next Page
