9.3 Maintenance Schedule
Complete maintenance tasks at the specified time or hour
interval, whichever comes first.
IMPORTANT! For more information, see the engine
manufacturer's manual.
Task
8 hours
or daily
50
hours or
annually
100
hours or
annually
200
hours or
annually Annually
600 hours
or every
three
years Reference
Check the engine oil level and
quality.
See page 26
Check the engine fuel level.
See page 25
Clean the engine air-intake grille,
and around the muffler and controls.
See the engine
manual
Check that all fasteners are
tightened to the specified torque.
See page 48
Check that the wheel lug nuts are
tightened to the specified torque.
See page 49
Remove all debris and entangled
material.
N/A
1
Check the shredder knife function.
See page 44
Check the drive belt operation.
See page 39
Check the rotor knife sharpness.
See page 42
Check the ledger knife sharpness.
See page 43
Check the shredder knife sharpness.
See page 44
Check the chop block for damage.
See page 43
Lubricate pivot points and hinges.
N/A
Grease the machine.
See page 38
Check the tire pressure.
See the tire
sidewall.
Wash the machine.
N/A
Check the drive belt tension.
See page 40
Service the engine exhaust system.
See the engine
manual
Clean the engine air filter.
2
See page 39
Change the engine oil.
See the engine
manual
Replace the engine spark plug.
See the engine
manual
Service the engine cooling and fuel
systems.
See the engine
manual
Replace the engine air filter.
See page 39
1 N/A indicates that a reference is not applicable.
2 In dusty conditions or when airborne debris is present, clean more often.
BXMT3213
Trailer Chipper / Shredder
Service and Maintenance
37
To Next Page
Loading...
