Wallenstein BXMT3213 - Wash the Machine

9.12 Wash the Machine
IMPORTANT! Using harsh chemicals can damage the
machine finish. Do not use gasoline, diesel fuel, or thinners
for cleaning.
IMPORTANT! A pressure washer can damage the machine's
product identification plate and make it unreadable. Do not
direct the spray from a pressure washer onto the product
identification plate.
IMPORTANT! A pressure washer can damage the bearings.
Do not direct the spray from a pressure washer directly onto
the bearings.
1. Use a hose or pressure washer and mild detergent to
remove dust, dirt, and debris.
2. Use a clean, soft cloth, that is dampened with water to
remove dirt from the product identification plate.
3. Apply grease to the rotor bearings.
4. Start the machine, let the engine run for a few minutes to
dry, and then stop the machine.
BXMT3213
Trailer Chipper / Shredder
Service and Maintenance
45