5 | P a g e
Wallgate Thrii®
PRODUCT MANUAL Issue 5_3
ORIGINAL INSTRUCTIONS
© 2013 Wallgate Ltd.
3. Glossary
The glossary lists all words, abbreviations and technical terminology used in this manual, along
with a short description of these terms.
The Engine Unit refers to the complete soap, water, dryer
module mounted on the back of the fascia.
The infrared (IR) sensor transmits an invisible beam into the
washbowl area, so that when interrupted by a person's hand
the beam is rebounded back to the receive sensor. This
creates an electrical signal which rapidly activates the hand
wash cycle.
The British Standard Pipe (BSP) thread is a family of standard
screw thread types that has been adopted internationally for
interconnecting and sealing pipe ends by mating an external
(male) with an internal (female) thread.
1
The term Solid Surface refers to the hard granite-effect or
solid colour material that is moulded to form the Thrii fascia.
The external electricity supply is provided to the Thrii.
Thrii® is a registered trademark of Wallgate Limited
1
Description sourced from Wikipedia at http://en.wikipedia.org/wiki/British_standard_pipe_thread
To Next Page
Loading...