Product Manual WDC200 Electronic Control
The term Lockout refers to regulating services by
restricting the number of usage cycles.
A momentary switch returns to its normal OFF position
when released.
A piezoelectric touch button converts the force applied to
the face of the touch button into an electrical signal.
The power rating of a device is a guideline set by the
manufacturer as a maximum power to be used with that
device.
This feature is used to assist in removing air trapped in
the plumbing system.
The term Remote Lockout refers to isolating water
services from a remote location.
The RJ-45 connectors are used to connect the WDC unit
to a PC or laptop.
Real Time Clock. This is a 24 hour 7 day clock used by
the WDC200 for program features such as Time Slots
and Hygiene Purge.
The System Test is a feature that allows you to operate
switches and touch buttons and make sure that these
operate the necessary outputs such as lights or valve
solenoids.
Usage of services such as basins, showers and WC
pans can be controlled using preset time slots. For
example, this feature can be used to prevent all the
showers in a facility being operated simultaneously
during peak periods, straining the capacity of the water
supply. The day is divided into 4 time slots, normally set
at 00:00 to 06:00, 06:00 to 12:00, 12:00 to 18:00 and
18:00 to 00.00.
A toggle switch is a class of electrical switches that are
actuated by a mechanical lever, handle, or rocking
mechanism.
Water Lockout means regulating water services by
restricting the number of usage cycles.
To Next Page
Loading...
