Wallgate WDC200 - 9 Model Variations

31
Product Manual WDC200 Electronic Control
Revision 18
9. Model Variations
9.1. WDC200-1
The WD200-2 is a standard WDC200 with two setting changes to operate a bath.
The setting changes are in “CELL 1 WATER SETTINGS” and “CELL 2 WATER
SETTINGS” menus and are as follows:
Menu setting:
WDC200-1 Setting
BASIN HOT RUN TIME
180 secs
BASIN COLD RUN TIME
180 secs
9.2. WDC200-2
The WD200-2 is a standard WDC200 with two setting changes to allow it to operate
a CIST21-ELEC. The CIST21-ELEC is a low-level cistern, refer to Wallgate website
for details (www.wallgate.com). The settings refer to the air pump operation time.
The setting changes are in “CELL 1 WATER SETTINGS” and “CELL 2 WATER
SETTINGS” menus and are as follows:
Menu setting:
WDC200-2 Setting
WC FULL CYCLE:
0.4secs
Menu setting:
WDC200-2 Setting
OLI travel distance
OFF