Product Manual WDC200 Electronic Control
3. Glossary
The glossary lists all words, abbreviations and technical terminology used in this
manual, along with a short description of these terms.
Table 1. Glossary
The outputs to the water valves for basin, shower and
WC can be set to automatically operate at a set time
every day. The water valve will operate for the cycle set
run time as per a user activation. The Auto-run feature
can be used for maintaining hygiene standards similar to
the Hygiene Purge function detailed below, note that
only the Auto-run or Hygiene Purge would be utilized
and not both together.
Building Management
System
BMS
A Building Management System is a computer-based
control system installed in buildings that controls and
monitors the building’s mechanical and electrical
equipment such as ventilation, lighting, power systems,
fire systems, and security systems.
The WDCMS Wallgate system is use for standalone
networking of the WDC control units to a dedicated PC
or laptop computer. You can manage the WDC units
through the network. You can also adjust time cycle
settings, lockout settings, remote water isolation on
individual units or groups, RTC settings, etc. You can
also view the unit status in real time and log data.
Activations of the Hygiene Purge function detailed below
are logged in memory and then using additional software
the logs can be downloaded from the WDC200 and
imported into a spreadsheet report.
This option is used when both full and half flush options
must be provided, using either one or two inputs.
This feature prevents more than one water outlet from
being operated at a time.
This feature uses a 6 litre or 4.5 litre flush.
The reduced flush is ⅔ of a full flush and the half flush ½
of a full flush.
This feature operates services unused for a specified
number of days. This avoids water stagnation when the
services are unused for longer periods.
A latching switch is a switch that maintains its state after
being activated.
To Next Page
Loading...
