Walther MPP-03-PRO - Routine Tasks; Spare Parts; Customer Service; Support

Rev. 1.6
Assembly Instructions - Micro Point Pulse Valve MPP-03-PRO
Page 12 of 22
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
7.6 Routine Tasks
No.
Description
Cleaning
Lubricating
Inspecting
Additional tasks
Frequency
1.
connections
(tightness)
X
monthly
2.
nozzle / needle
guide
X
X
exchange if
damaged
monthly
3.
complete valve
X
check for wear
after 10 mio.
switching
operations
7.7 Spare Parts
IMPORTANT
Only use original spare parts from the manufacturer!
Wrong or defective spare parts from other manufacturers can damage the device. If other than
original spare parts of the manufacturer will be used, all obligations from the manufacturer or
his sales partners, such as guarantees, service contracts etc will be forfeited without further
notice.
7.8 Customer Service / Support
Walther Systemtechnik GmbH
Hockenheimer Straße 3
D-76726 Germersheim
Germany
Phone ++49(0)7274-7022-0
Telefax ++49(0)7274-7022-91
Email info@walther-2000.de
Internet www.walther-2000.de