W&H MS - Page 61

ANNEX 5. Example of cycle data report
61
Use only the printer and
the thermal paper provided
by W&H.
This ensures a long (at
least 10 years) stability of
image of the printouts.
NOTE
Sterilizer model, serial number, software rev.
Surgery – practice – doctor name
Cycle name
Cycle counter
Programmed sterilization temperature
Programmed sterilization time
Programmed evaporation time
Cycle start date and time
Headers for the table below
Cycle start
De-aeration phase
(purging pulses)
End of the de-aeration phase
Phase of pressure rise to sterilization conditions
Sterilization phase (process) start
Min. and max. temperatures
during the sterilization phase (process)
Min. and max. pressures
during the sterilization phase (process)
Process end conditions
Evaporation phase start
Evaporation phase
Evaporation phase end
Pressure levelling phase
Cycle end conditions
Cycle end date and time
Cycle outcome
Tracking code for traceability management