Wansview NCM625GA - Night Vision Setting; Safety; User Setting

Support Email/ Skype: service2@wansview.com 46
5.4.3.5 Night Vision Setting
5.4.4 Safety
5.4.4.1 User Setting
1: Add user
Enter "Night Vision Setting" to set IR LED
and IRCUT. Once IR LED is off, the IR LED
IR cut will not work any longer.
On this page you can can add new user name/password
and modify and delete user name.
There are 3 user levels you can set. Click Add to
enter the following interface to add users and choose
user authorities.