EasyManua.ls Logo

Wansview NCM625GA - Port Forwarding Configuration

Wansview NCM625GA
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Support Email/ Skype: service2@wansview.com 64
1. Please visit https://addons.mozilla.org/en-US/firefox/addon/ie-tab/ to download the IE Tab for Firefox.
Figure 8.4.1
2. Open Firefox, right click and choose "View Page in IE Tab". Then you can view the live stream of the camera.
Figure 8.4.2
8.5 Port Forwarding
Every time you reboot the camera, the Local IP Address will be changed, so you’d better set the camera’s local IP by using the
SearchPro tool (on the CD).
There are two ways to do port forwarding:
1. One router connected (only one router is being used, and the router is directly connected to the WAN)
Log on the router, find the Port forwarding (or Port Mapping or Virtual Server), then add the camera’s local IP and Port as in the
figure below:

Table of Contents