07610-004-37-37-P
13
Before operating machine, verify:
1. Strainer is in place and clean.
2. Wash and rinse arms are screwed securely into place and end-caps are tight.
3. Wash and rinse arms rotate freely.
4. Chemical levels in chemical containers are correct.
1. Close door.
2. Turn machine on.
3. Machine will automatically begin to fill.
4. Once wash tub is filled, wait until wash temperature is at least 150 °F for UH30-
FND and 120 °F for UL30 before operating machine.
OPERATING INSTRUCTIONS
OPERATION
PREPARATION
FILLING THE
WASH TUB
UH30-FND UL30
See Initial Fill section
for UH30-FND models.
UL30 has combined wash/
rinse arms.
To Next Page
Loading...