To Next Page
T
Timothy BerryAug 5, 2025
Why is my Water Ace R106 not pumping water?
- RRyan MitchellAug 5, 2025
Your Water Ace Water Pump might not be delivering water, or is delivering it at a reduced rate, due to several reasons. There may be an air leak in the inlet suction connection. Try tightening the inlet connection and ensuring the hose gasket is in place and in good condition. Other potential causes include a vertical pumping distance exceeding 20 feet, an inlet hose longer than 25 feet, a plugged or kinked inlet hose, a collapsed hose liner, a worn impeller (see replacement instructions on page 2), or a worn pump body, which would require complete pump replacement.
General
