Need help?Do you have a question about the WaterLogic WL350 and is the answer not in the manual?
Explains signal words and their meaning for safety warnings.
Lists essential safety guidelines for operating and installing the unit.
Lists critical safety and preparation steps before servicing the WL350 unit.
Step-by-step guide to reset the hot tank's thermal overload protection switch.
Details the process for removing mineral deposits from the hot water tank.
Steps to prepare the unit before final installation and operation.
Comprehensive steps for installing the WL350 water treatment system.
Index of fault codes and their corresponding troubleshooting steps.
Guides on diagnosing and resolving power-related issues with the unit.
General| UV Purification | Yes |
|---|---|
| Water Temperatures | Hot and Cold |
| Certifications | CE, RoHS |
| Voltage | 220-240 V |
| Type | Bottleless Water Dispenser |
| Cooling Capacity | 2.5 liters/hour |
| Heating Capacity | 5 liters/hour |
| Dimensions | 330 x 330 x 980 mm |
| Power Supply | 220-240 V |
| Dispensing Area Height | 23 cm |
| Hot Water Temperature | 85-90 °C |
| Cold Water Temperature | 5-10 °C |
| Power Consumption | 500 W |
To Next Page
