SmartPlate Installation, Operation & Maintenance Manual
APPENDIX A – MODBUS CONTROL AND COMMUNICATION
OMM-0069_0H • SP-100 • 1/30/2020 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page 99 of 134
2. Enter 24 using the Up Arrow. The
number will flash and display PASS.
3. Scroll to Goto (current value is
OPEr) and use the Down Arrow to
enter a value of Full. The entry
confirms by flashing the lower
display momentarily off and then on.
4. Go to the home screen by pressing
the Page and Scroll buttons at the
same time.
5. Page to the cmS list.
6. Scroll to the Addr screen.
7. Use the Up Arrow to select the
desired address number.
To Next Page
Loading...
