Wave ATLANTIC - Packing List; Package Contents; Instructions; Product Specifications

INSTALLATION INSTRUCTIONS
Ensure to check all parts are present:
a. Spa pool
b. PU cover with foil and zipper
c. Inflation hose
d. Filter cartridge
e. Filter cartridge cover
f. Rubber plug
g. Repair kit
WARNING: Make sure the surface can support the load.
WARNING: There must be an adequate draining system to deal with any overflow of water.
IMPORTANT
It is the responsibility of the spa owner/user to assure the integrity of the spa site at all times. The base where the spa is installed MUST be smooth, flat,
level and capable of supporting the weight of the spa, water and users for the entire time it is installed. – if the spa is used on a surface which does not meet
these requirements, any damage caused by improper support with void the warranty.
a
b
c
d
e
f
g
Figure
a