8. Fill the spa using a garden hose to fill to the water level printed on the spa wall.
9. Place the cover on to the spa and fasten.
OPERATING YOUR WAVE SPA
DO NOT dry-run the power pack. Always ensure that the water matches the water line printed on the spa wall. Using the spa incorrectly will void warranty.
CONTROL PANEL
FILTER KEY – This is an ON/OFF key for the filter system. Press this key to activate the filter pump. Press again to turn the filter off. The red indicator light
should be ON whenever the filter is active.
WARNING: When the letters ‘FC’ appear on the display screen, accompanied by a warning tone, this means that the FILTER PUMP has been working for 168
hours and is a reminder to clean or replace the filter element. The indicator lamp for the filter system will still be on but the filter pump will have timed out.
To Next Page
