Waveshare Barcode Scanner Module - TERMINATOR SETTING OPTIONS; DATA SEGMENT INTERCEPTION

Barcode Scanner Module User Manual
30 / 57 Rev1.0 Date:180621
4. Terminator
Scanner will output a terminator after succeed in decoding.
5. Data segment intercept
The decoding data 【Data】could be divided to three parts:
【Start】【Center】【End】
The length of Start and End segments can be set:
Close Tail
*Add Tail CR
Add Tail TAB
Add Tail CRLF
*Send whole Data
Only Send Start Segment
Only Send End
Segment
Only Send Center
Segment