Barcode Scanner Module User Manual
34 / 57 Rev1.0 Date:180621
3) Scanning “Modify RF Information”
4) Scanning data setting code: “4”, “6”, “4”, “1”, “4”, “9”, “4”,
“C”
5) Scanning “Save”
BARCODE TYPES ENABLE/DIABLE
1. All Types Enable
With these setting code, you can enable/disable all types of barcode. If you disable
all types of barcode, only the setting code is scannable.
2. Barcode Rotating
You can enable the function that supports 360° rotation. Disable this function can
improve decoding speed.
To Next Page
Loading...
