Waveshare WS-431E User Manual

WS-431E 4G Router
www.waveshare.com
63
/
68
www.waveshare.com/wiki
 Enable static tunnel IP Address: it is not enabled by default, and the server automatically
allocates IP. You can fill in the static tunnel IP here;
 Extra option: append the PPPD option, magic words, etc. No operation is required by
default;
 NAT: This function is enabled by default. When the content needs to communicate with the
outside, replace the internal address with the public address. If this item is disabled, the
network address translation function cannot be realized;
 Peer subnet & mask: after filling in correctly, the subnet interworking function under VPN
can be directly realized when NAT function is turned on;
 Enable ping: Real-time VPN online detection and reconnection mechanism. Not enabled by
default. Checking this option indicates that the VPN will be reconnected if the ping fails.
 L2TP connection succeeded: after filling in the relevant parameters, save & apply, and enter
VPN--VPN status to check the connection status.
4.7.3. IPSEC

Waveshare WS-431E Specifications

General

Brand	Waveshare
Model	WS-431E
Category	Network Router
Language	English