In this chapter
Physical Features
Installation
13
e Click 200 module is designed to protect SmartSensors from surges on all power and
communication connections, suppressing power surges for DC power, half-duplex RS-485
communication and full-duplex RS-232 communication with CTS and RTS.
e Click 200 can also be used to protect any device from surges from the SmartSensor or
any other device with 9–28 VDC power or RS-485 or RS-232 communication.
Figure 13.1 – The Click 200
Click 200 —
Lightning Surge Protector 13
To Next Page
Loading...
