23
MANUFACTURER’S DECLARATION OF CONFORMITY
Garage Door Models: Wayne-Dalton Optimal, Wayne-Dalton Confort, Wayne-
Dalton Diffusion, Wayne-Dalton Prestige+/40mm/Pinnacle
is in conformity to the applicable sections of Door Standards EN 292, EN 294, EN 349, EN 418, prEN894, EN 1037,
EN 1088, EN 12424, EN 12444, EN 12453, EN 12604,
EN 60204-1
Per the provisions & all amendments of the EU Directives 73/23/EEC, 89/336/EEC, 89/392/EEC, 89/106/EEC
Declaration of Conformity
The above listed garage door models, when installed and maintained according to all the Manufacturer’s Instructions, meet the provisions of the above
listed EU Directives and all amendments.
I, the undersigned, hereby declare that the equipment specified above, as well as any accessories to such equipment listed in the Notes of Installation,
Use, and Maintenance conform to the above listed Directives and Standards.
Signature of manufacturer:
François Médart – President Wayne-Dalton Europe November 10, 2005
Place: Wayne-Dalton Europe
1 rue Maurice Hollande
51100 Reims, France
Please Do Not Return This Product To The Store
Questions?
Need Information?
Visit our website:
www.waynedaltoneurope.com
Thank you for your purchase
Models: Wayne-Dalton Optimal, Wayne-Dalton Confort, Wayne-Dalton Diffusion, Wayne-Dalton Prestige+/40mm/Pinnacle
Covered under one or more of the following U.S. patents:
D413,055/D413,579/D413,867/D421,031/D466,141/D472,568/D472,910/D473,573/D473,574/D474,215/D475,146/5,259,143/5,408,724/5
,409,051/5,419,010/5,929,580/5,931,212/6,078,249/6,145,570/6,164,014/6,253,824/6,263,947/6,325,134/6,326,751/6,326,754/6,401,7
92/6,442,897/6,561,255/6,561,256/6,568,454/6,605,910/6,588.156/6,640,872/6,667,591/6,672,362/6,739,372/6,899,157
European Patent: EP0975417 other U.S. and foreign patents pending.
To Previous Page
Loading...
