Wayne-Dalton Prodrive 3322B-Z User Manual

®
GARAGE DOOR OPENER
INSTALLATION INSTRUCTIONS AND OWNER’S MANUAL
Chain/ Belt Drive
Models: 3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B
3220C-Z, 3221C-Z, 3222C-Z, 3224C-Z, 3320B-Z, 3322B-Z, 3324B-Z
IMPORTANT NOTICE!
Read the enclosed instructions carefully before installing/operating
this garage door opener. Pay close attention to all warnings and
notes. This manual MUST be attached to the wall in close proximity
to the garage door.
Copyright 2008 Wayne-Dalton Corp. Part No. 325809 Rev.5 7/16/2008
FOR RESIDENTIAL SECTIONAL OVERHEAD GARAGE DOORS ONLY!
DO NOT USE ON ONE PIECE DOORS!
IMPORTANT! THE DOOR AND OPENER WILL NOT FUNCTION PROPERLY UNTIL
INFRARED SAFETY SENSORS ARE INSTALLED AND PROPERLY ADJUSTED!
GARAGE DOORS & OPENERS

Wayne-Dalton Prodrive 3322B-Z Specifications

General

Type	Belt Drive
Drive	Belt
Voltage	120V AC
Frequency	60 Hz
Horsepower	1/2 HP
Wireless Technology	Z-Wave
Security	Rolling Code Technology
Speed	7.5 inches per second
Remote Control	Included
Lighting	100W bulb compatibility

Summary

Pre-Installation Inspection

Pre-Installation Checks

Identify Your Door

Verifies the garage door type is sectional, not one-piece.

Test Your Door

Performs manual tests to ensure door balance and smooth operation.

Pre-Assembly Check

Important Installation Instructions

Attaching Opener to Rail

Positioning and Installing Front Wall Bracket

Attach Unit to Front Wall Bracket

Positioning Motor End of Opener

Mounting Opener End

Mounting Door Bracket

Wired Wall Station Installation

Deluxe Multi-Function Wireless Wall Station Installation

Wired Infrared Safety Sensor Installation

Installation of Wiring for Wired Infrared Safety Sensor

Connecting Wired Infrared Safety Sensor to Opener

Connecting Opener To Outlet

Connecting Trolley To Latch Assembly

Alignment of Wired Infrared Safety Sensors

Setting Trolley Close Position

Connecting Door Arm to Door

Setting Door Close Travel

Setting Door Opening Travel

Contact Obstruction Test

Safety Sensor Obstruction Test

Programming Wireless Keyless Entry

Installing Wireless Keyless Entry

Power Connection (Permanent Wiring Option)

Mounting Door Bracket To A 9700 Series Door

Mounting Door Bracket To A (9100, 9400, 9600, 5120 & 5140 Series Door)

Setting Trolley Close Position/ Connecting Door Arm (Models 9100, 9400, 9600, 5120, 5140 & 9700) With TorqueMaster® Or Extension Springs

Setting Trolley Close Position/ Connecting Door Arm (Models 9100, 9400, 9600, 5120, 5140 & 9700) With Torsion Springs

Important Safety Instructions

Door Activation

Emergency Disconnect

Explains the function and use of the emergency release system.

How The Light Works and What It Means When It Flashes

Operating the Wireless Wall Station

Primary Programming for HomeLink® to the Prodrive ®

Adjustment # 1 Opening and Closing Force

Adjustment # 2 Contact Obstruction Sensing

Adjustment # 3 Positive Mechanical Door Lock

Programming Wireless Wall Station(s) Or Transmitter(s) to Opener

Troubleshooting Guide