Wayne-Dalton Prodrive 3324B User Manual

®
GARAGE DOOR OPENER
INSTALLATION INSTRUCTIONS AND OWNER’S MANUAL
Chain/ Belt Drive
Models: 3220C, 3221C, 3222C, 3224C, 3320B, 3322B, 3324B
3220C-Z, 3221C-Z, 3222C-Z, 3224C-Z, 3320B-Z, 3322B-Z, 3324B-Z
IMPORTANT NOTICE!
Read the enclosed instructions carefully before installing/operating
this garage door opener. Pay close attention to all warnings and
notes. This manual MUST be attached to the wall in close proximity
to the garage door.
Copyright 2008 Wayne-Dalton Corp. Part No. 325809 Rev.5 7/16/2008
FOR RESIDENTIAL SECTIONAL OVERHEAD GARAGE DOORS ONLY!
DO NOT USE ON ONE PIECE DOORS!
IMPORTANT! THE DOOR AND OPENER WILL NOT FUNCTION PROPERLY UNTIL
INFRARED SAFETY SENSORS ARE INSTALLED AND PROPERLY ADJUSTED!
GARAGE DOORS & OPENERS

Wayne-Dalton Prodrive 3324B Specifications

General

Brand	Wayne-Dalton
Model	Prodrive 3324B
Category	Garage Door Opener
Language	English

Summary

IMPORTANT INSTALLATION INSTRUCTIONS

Attaching Opener to Rail

Positioning and Installing Front Wall Bracket

Positioning Motor End of Opener

Mounting Opener End

Wired Infrared Safety Sensor Installation

Alignment of Wired Infrared Safety Sensors

Connecting Door Arm to Door

Contact Obstruction Test

Safety Sensor Obstruction Test

IMPORTANT SAFETY INSTRUCTIONS

Adjustments

Adjustment # 1 Opening and Closing Force

Adjusting the force settings for safe and proper door operation during opening and closing.

Adjustment # 2 Contact Obstruction Sensing

Setting the opener to reverse when encountering an obstruction during closing.

Adjustment # 3 Positive Mechanical Door Lock

Troubleshooting