52
Please note that the "pedestrian" function must only be used when pushing the bicycle. Do
not use it when you are on the bike.
7. Lighting
Hold down the 【UP】 and 【MODE】 buttons for 2 seconds, the screen backlight comes on and the
controller prompts you to turn on the headlights. The LCD backlight can be activated when there is
insufficient outside light or when riding at night. Hold down the 【UP】 and 【MODE】 buttons again
for 2 seconds and the LCD backlight turns off.
8. Selecting the assistance level
Press the 【HIGH】 or 【LOW】 button to change the assistance level of the electric bike and modify
the power output of the engine.
9. Battery levels
When the battery is fully charged, the five-segment LCD display is on. When the battery is out of
charge, the outer frame of the battery flashes, indicating that the battery should be charged
immediately.
To Next Page
Loading...
