5.6 Privacy Area
The system allows you to mask images in a specified area and this area is called
privacy area.
Operation Description
Click Menu in the upper left corner of the camera management screen and choose
Privacy area to access the Privacy area screen, as shown in Figure 5-10.
Figure 5-10 Privacy Area screen
Operation Steps
Step 1 Select a camera in the camera list on the left side of the Privacy area screen.
Step 2 In the video window, hold down and drag the left mouse button to draw a privacy area.
Step 3 Click OK to save privacy area settings or click Copy to all, then click OK to apply the
privacy area settings to cameras of all channels.
----End
5.7 Camera tamper
Camera Tamper refers to the occurrence of tampered or shifted in video image. An
alarm is generated if such an event occurs.
To Next Page
Loading...
Need help?
General
