21
Mercedes Sprinter Kiev
27. Route 3/4 in. coolant hose from the supply
“T” fitting to the inlet side of the coolant
pump.
28. Route 5/8 in. coolant hose from the adapter
installed on the coolant pump, through the
hole in the driver’s side step-well, and along
the roof-line, to the area where the Kiev will
be mounted. Leave enough hose to connect
to the Kiev unit.
29. Route the 5/8 in. coolant hose from the
return “T” fitting, through the hole in the
driver’s side step-well, to the outlet side of the
coolant valve.
To Next Page